Display Mpls Ldp Remote-Peer - 3Com S7906E Command Reference Manual

Peer LDP ID
Peer Max PDU Length : 4096
Peer Loop Detection : Off
Peer FT Flag
Recovery Timer
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source
------------------------------------------------------------
Peer LDP ID
Peer Max PDU Length : 4096
Peer Loop Detection : Off
Peer FT Flag
Recovery Timer
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source
-------------------------------------------------------------
Peer LDP ID
Peer Max PDU Length : 4096
Peer Loop Detection : Off
Peer FT Flag
Recovery Timer
Peer Label Advertisement Mode : Downstream Unsolicited
Peer Discovery Source
------------------------------------------------------------

display mpls ldp remote-peer

Syntax
display mpls ldp remote-peer [ remote-name remote-peer-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32 characters.
|: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration in the System Volume.
begin: Displays all lines starting with the line that matches the regular expression.
exclude: Displays all lines other than those matching the regular expression..
include: Displays all lines matching the regular expression.
: 172.17.1.2:0
Peer Transport Address : 172.17.1.2
Peer Path Vector Limit : 0
: Off Peer Keepalive Timer
: ---- Reconnect Timer
: Vlan-interface1
: 168.1.1.1:0
Peer Transport Address : 168.1.1.1
Peer Path Vector Limit : 0
: Off Peer Keepalive Timer
: ---- Reconnect Timer
: Vlan-interface2
: 100.10.1.1:0
Peer Transport Address : 100.10.1.1
Peer Path Vector Limit : 0
: Off Peer Keepalive Timer
: ---- Reconnect Timer
: Vlan-interface3
1-9
: 45 Sec
: ----
: 45 Sec
: ----
: 45 Sec
: ----