3Com S7906E Command Reference Manual page 1505

1
MCE Configuration Commands
This chapter only describes the commands related to the multi-CE (MCE) feature. For information about
the routing protocol configuration commands in the configuration examples, refer to the IP Routing
Volume of this manual.
MCE Configuration Commands
description
Syntax
description text
undo description
View
VPN instance view
Default Level
2: System level
Parameters
text: Description for the VPN instance, a string of 1 to 80 characters.
Description
Use the description command to configure a description for the current VPN instance.
Use the undo description command to delete the description.
Examples
# Configure the description of VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] description vpn1
display bgp vpnv4 vpn-instance group
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name group [ group-name ]
1-1