Reset Bgp L2Vpn - 3Com S7906E Command Reference Manual

Description
Use the mtu command to set the maximum transmission unit (MTU) for the kompella connections.
Use the undo mtu command to restore the default.
The mtu command is not recommended because it affects only negotiation of protocol parameters that
may take place and does not affects the forwarding.
Examples
# Set the MTU for Kompella connections to 1000.
<Sysname> system-view
[Sysname] mpls l2vpn vpn1
[Sysname-mpls-l2vpn-vpn1] mtu 1000

reset bgp l2vpn

Syntax
reset bgp l2vpn { as-number | ip-address | all | external | internal }
View
User view
Default Level
1: Monitor level
Parameters
as-number: Resets L2VPN BGP connections with the peers in the AS with this number. The AS number
must be in the range 1 to 65535.
ip-address: Resets the L2VPN BGP connection to the peer with this IP address.
all: Resets all L2VPN BGP connections.
external: Resets L2VPN EBGP sessions.
internal: Resets L2VPN IBGP sessions.
Description
Use the reset bgp l2vpn command to reset L2VPN BGP connections.
Examples
# Reset all L2VPN BGP connections.
<Sysname> reset bgp l2vpn all
1-25