Mpls L2Vpn; Mpls L2Vpn Vpn-Name - 3Com S7906E Command Reference Manual

At present, the S7900E series Ethernet switches do not support the control word option.
Related commands: tunnel select-seq load-balance-number in MPLS L3VPN Commands of the
MPLS Volume.
Examples
# Create a Martini MPLS L2VPN connection.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] mpls l2vc 2.2.2.9 999

mpls l2vpn

Syntax
mpls l2vpn
undo mpls l2vpn
View
System view
Default Level
2: System level
Parameters
None
Description
Use the mpls l2vpn command to enable MPLS L2VPN.
Use the undo mpls l2vpn command to disable MPLS L2VPN and delete all L2VPN configurations.
You must use the mpls l2vpn command to enable MPLS L2VPN before configuring the other L2VPN
commands.
Examples
# Enable MPLS L2VPN.
<Sysname> system-view
[Sysname] mpls l2vpn

mpls l2vpn vpn-name

Syntax
mpls l2vpn vpn-name [ encapsulation { ethernet | vlan } [ control-word | no-control-word ] ]
undo mpls l2vpn vpn-name
View
System view, MPLS L2VPN view
1-22