Display Bgp L2Vpn - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname] mpls l2vpn vpn1
[Sysname-mpls-l2vpn-vpn1] ce ce1
[Sysname-mpls-l2vpn-ce-vpn1-ce1] connection ce-offset 1 interface vlan-interface 10

display bgp l2vpn

Syntax
display bgp l2vpn { all | group [ group-name ] | peer [ [ ip-address ] verbose ] | route-distinguisher
route-distinguisher [ ce-id ce-id [ label-offset label-offset ] ] }
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all L2VPN information.
group-name: Name of the peer group, a string of 1 to 47 characters.
ip-address: IP address of the peer.
verbose: Displays detailed information.
route-distinguisher: Route distinguisher in the format of nn:nn or IP-address:nn. It can be a string of 3 to
21 characters.
ce-id: VPN CE ID of the MPLS L2VPN connection, in the range 0 to 199. A remote connection requires
the remote CE number.
label-offset: Label offset, in the range 0 to 65,535.
Description
Use the display bgp l2vpn command to display information about BGP L2VPN in the BGP routing
table.
Related commands: route-distinguisher.
Examples
# Display all information about L2VPN in the BGP routing table.
<Sysname> display bgp l2vpn all
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
Route Distinguisher: 100:1
CE ID Label Offset
1 0
Label Base nexthop
8202 3.3.3.9
1-4
pref as-path
100