Fast-Leave (Mld-Snooping View) - 3Com S7906E Command Reference Manual

View
MLD-Snooping view
Default Level
2: System level
Parameters
None
Description
Use the drop-unknown command to enable dropping unknown IPv6 multicast data globally.
Use the undo drop-unknown command to disable dropping unknown IPv6 multicast data globally.
By default, this function is disabled, that is, unknown IPv6 multicast data is flooded in the VLAN.
This command works only on MLD Snooping–enabled VLANs, but not on VLANs with MLD enabled on
their VLAN interfaces.
Related commands: mld-snooping drop-unknown.
Examples
# Globally enable the device to drop unknown IPv6 multicast data.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] drop-unknown

fast-leave (MLD-Snooping view)

Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
View
MLD-Snooping view
Default Level
2: System level
Parameters
vlan vlan-list: Defines one or multiple VLANs. You can provide up to 10 VLAN lists, by each of which
you can specify an individual VLAN in the form of vlan-id, or a VLAN range in the form of start-vlan-id to
end-vlan-id, where the end VLAN ID must be greater than the start VLAN ID. The effective range of a
VLAN ID is 1 to 4094.
Description
Use the fast-leave command to enable fast leave processing globally.
Use the undo fast-leave command to disable fast leave processing globally.
By default, fast leave processing is disabled.
1-4