Peer Route-Policy (Bgp-Vpnv4 Subaddress Family View) - 3Com S7906E Command Reference Manual

ip-address: IP address of the peer.
Description
Use the peer reflect-client command to configure the local device to be a route reflector (RR) and set
a peer or peer group as the client of the RR.
Use the undo peer reflect-client command to remove the configuration.
By default, no RR or RR client is configured.
Examples
# In BGP-VPNv4 subaddress family view, configure the local device to be an RR and set peer group test
as the client of the RR.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test reflect-client
# In BGP-L2VPN address family view, configure the local device to be an RR and set peer group test as
the client of the RR.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer test reflect-client

peer route-policy (BGP-VPNv4 subaddress family view)

Syntax
peer { group-name | ip-address } route-policy route-policy-name { export | import }
undo peer { group-name | ip-address } route-policy route-policy-name { export | import }
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
route-policy-name: Name of the routing policy, a string of 1 to 19 characters.
export: Filters the routes to be advertised.
import: Filters the received routes.
Description
Use the peer route-policy command to apply a routing policy to a peer or peer group.
Use the undo peer route-policy command to remove the application.
By default, no routing policy is applied to a peer or peer group.
1-45