Peer Vpn-Instance Route-Policy Import; Policy Vpn-Target - 3Com S7906E Command Reference Manual

peer vpn-instance route-policy import

Syntax
peer { group-name | peer-address } vpn-instance vpn-instance-name route-policy route-policy-name
import
undo peer { group-name | peer-address } vpn-instance vpn-instance-name route-policy
route-policy-name import
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
peer-address: IP address of the peer, in dotted decimal notation.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
route-policy-name: Name of the routing policy to be applied, a case-sensitive string of 1 to 19
characters.
Description
Use the peer vpn-instance route-policy import command to specify the routing policy to be applied to
VPNv4 routes received from a nested VPN peer or peer group.
Use the undo peer vpn-instance route-policy import command to restore the default.
By default, no routing policy is applied.
A routing policy for a peer and a routing policy for the peer group to which the peer belongs are of the
same priority; the one configured last takes effect.
Note that:
This configuration takes effect only after the nested VPN function is enabled.
Deleting the VPN instance to which a peer belongs will also delete the configuration of this
command.
Examples
# Specify to apply routing policy comtest to VPNv4 routes received from peer group ebgp.
<Sysname> system-view
[Sysname] bgp 10
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer ebgp vpn-instance vpn1 route-policy comtest import

policy vpn-target

Syntax
policy vpn-target
undo policy vpn-target
1-48