Subaru IMPREZA GD 2007 Series Manual page 3038

asieps_tobira_IM_US.book 3 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Step
5 PERFORM DIAGNOSIS.
1) Inspect and repair all DTC using the "Diag-
nostic Procedure with Diagnostic Trouble Code
(DTC)". <Ref. to 6MT(diag)-28, Diagnostic Pro-
cedure with Diagnostic Trouble Code (DTC).>
NOTE:
Refer to "List of Diagnostic Trouble Code
(DTC)" for DTC. <Ref. to 6MT(diag)-26, List of
Diagnostic Trouble Code (DTC).>
2) Perform the Inspection Mode. <Ref. to
6MT(diag)-23, Inspection Mode.>
Basic Diagnostic Procedure
MANUAL TRANSMISSION AND DIFFERENTIAL (DIAGNOSTICS)
Check
Is DTC displayed?
6MT(diag)-3
Yes No
Record all DTC Inspect based on
using the "Diag- the general diag-
nostic Procedure nosis table.
with Diagnostic
Trouble Code
(DTC)" for the
inspection. <Ref.
to 6MT(diag)-28,
Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC).> Repeat
execute diagnosis
until DTC no longer
appears.