Subaru IMPREZA GD 2007 Series Manual page 2991

asieps_tobira_IM_US.book 86 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
18) Using the ST, install the 3rd-4th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
• Make sure that the 3rd-4th driven gear is in-
stalled in the correct direction.
• Match the groove on the 3rd-4th driven gear to
the key.
ST
(B)
(A) 4th gear
(B) 3rd gear
(C) 2nd gear
19) Make sure that the 2nd driven gear can be
turned smoothly by hand. If it does not turn smooth-
ly, reassemble.
20) Attach the key.
Driven Gear Assembly
21) Using the ST, install the 5th-6th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
• Make sure that the 5th-6th driven gear is in-
stalled in the correct direction.
• Match the groove on the 5th-6th driven gear to
the key.
(A)
(C)
MT-00609
(A) 6th gear
(B) 5th gear
(C) 4th gear
22) Using the ST, install the ball bearing.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
Confirm that the ball bearing is installed in the prop-
er direction.
MT-00610
23) Make sure that the ball bearing turns smoothly
by hand. If it does not turn smoothly, reassemble.
24) Install a new lock nut.
6MT-86
ST
(A)
(B)
(C)
MT-00611
ST
MT-00612