Subaru IMPREZA GD 2007 Series Manual page 3432

asieps_tobira_IM_US.book 26 ページ ２０１２年１月１７日 火曜日 午後３時４８分
POWER ASSISTED SYSTEM (POWER STEERING)
4) Remove the small clip from the boot using pliers,
and then move the boot to tie-rod end side.
(1)
(1) Clip
5) Using a flat tip screwdriver, remove the band
from boot.
(1) Band
6) Extend the rack approx. 40 mm (1.57 in) out. Us-
ing a flat tip screwdriver, flatten the tab of the lock
washer on both side of the tie-rod end.
CAUTION:
Be careful not to scratch the rack surface as oil
leaks may result.
(1) Lock washer
(2) Approx. 40 mm (1.57 in)
Steering Gearbox
PS-00048
(1)
PS-00082
(2)
(1)
PS-00439
PS-26
7) Using the ST, loosen the lock nut.
ST 926230000 SPANNER
8) Tighten the adjusting screw until it can no longer
be tightened.
9) Remove the tie-rod using a 32 mm wrench or ad-
justable wrench.
10) Loosen the adjusting screw, and remove the
spring and sleeve.
11) Remove the two bolts securing valve assem-
bly.
ST
PS-00089
PS-00109
PS-00110
PS-00116