Subaru IMPREZA GD 2007 Series Manual page 3372

asieps_tobira_IM_US.book 2 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FRONT SUSPENSION
1. General Description
A: SPECIFICATION
Camber (tolerance: ±0°45' adjustment
standard: ±0°30')
Caster
Front Toe-in
Kingpin angle
Wheel arch height
+12
[Tolerance:
Camber (tolerance: ±0°45' adjustment
standard: ±0°30')
Toe-in
Rear
Thrust angle
Wheel arch height
+12
[Tolerance:
NOTE:
• Front and rear toe-in and front camber can be
adjusted. If the toe-in or camber exceeds the toler-
ance, adjust toe-in or camber within the adjustment
standard.
General Description
Model
Non-turbo
–0°15'
3°25'
Tolerance: 0±3 mm (0±0.12 in), Toe angle (sum of both wheels) 0°±15'
14°20'
406 mm
+0.47
mm ( in)] (15.98 in)
–24 –0.94
–1°25'
Tolerance: 0±3 mm (0±0.12 in), Toe angle (sum of both wheels) 0°±15'
381 mm
+0.47
mm ( in)] (15.0 in)
–24 –0.94
FS-2
Sedan Wagon
Turbo STI Non-turbo
–0°25' –0°30' –0°10'
3°30' 3°40' 3°25'
Adjustment standard: 0±2 mm (0±0.08 in),
Toe angle (sum of both wheels) 0°±10'
14°35' 14°50' 13°30'
396 mm 386 mm 397 mm
(15.59 in) (15.20 in) (15.28 in)
–1°30' –1°40' –1°15'
Adjustment standard: 0±2 mm (0±0.08 in),
Toe angle (sum of both wheels) 0°±10'
Tolerance: 0°±30', adjustment standard: 0°±20'
376 mm 363 mm 381 mm
(14.80 in) (14.29 in) (15.0 in)
• Other items indicated in the specifications table
cannot be adjusted. If other items exceed specifica-
tions, check suspension parts and connections for
deformation, and replace with new parts as re-
quired.
B
(1)
A
(1) Front
A – B = Positive: Toe-in, Negative: Toe-out
α = Individual toe angles
OUTBACK
Turbo
–0°20' –0°05'
3°30' 3°25'
13°45' 13°20'
387 mm 402 mm
(15.24 in) (15.83 in)
–1°20' –1°10'
376 mm 386 mm
(14.80 in) (15.20 in)
FS-00001