Subaru IMPREZA GD 2007 Series Manual page 3052

asieps_tobira_IM_US.book 17 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. CLEAR MEMORY MODE
1) On the «Main Menu» display screen, select {2.
Each System Check}.
2) On the «System Selection Menu» display screen,
select {Transmission}.
3) Select {Center Differential Control}.
4) On the «Transmission Diagnosis» display screen,
select {Clear Memory}.
Display Contents to be monitored
Clear Memory? DTC deleting function
5) When "Done" and "Turn ignition switch to OFF"
are shown on the display screen, turn the ignition
switch to OFF and close the Subaru Select Monitor.
NOTE:
For details concerning the operation procedure, re-
fer to the "SUBARU SELECT MONITOR OPERA-
TION MANUAL".
4. FREEZE FRAME DATA
NOTE:
• Data stored at the time of trouble occurrence is
shown on the display.
• Each time a trouble occurs, the latest information
is stored in the freeze frame data in memory.
• Up to 9 freeze frame data will be stored.
DTC Item
Brake Switch
P1521
Circuit Range
DCCD CAN
P1720
System Circuit
DCCD Engine
P1721 Rpm Signal
System Circuit
Lateral G Sensor
P1759
Circuit
Yaw Rate
P1764 Sensor System
Circuit
Yaw Rate Side G
Sensor
P1765
Reference
System Circuit
DCCD Steering
P1767
Angle Sensor
Circuit Of Center
P1875
Diff.
Accelerator
P2125 Pedal Position
Sensor E
Subaru Select Monitor
MANUAL TRANSMISSION AND DIFFERENTIAL (DIAGNOSTICS)
Contents to be monitored
Brake switch circuit status is
displayed.
CAN communication circuit
status is displayed.
Engine speed signal circuit
status is displayed.
Lateral G sensor circuit status
is displayed.
Yaw rate & lateral G sensor
circuit status is displayed.
Yaw rate & lateral G sensor
reference circuit status is dis-
played.
Steering angle sensor circuit
status is displayed.
Center differential circuit sta-
tus is displayed.
Accelerator pedal position
sensor circuit status is dis-
played.
6MT(diag)-17