Subaru IMPREZA GD 2007 Series Manual page 3104

asieps_tobira_IM_US.book 69 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
7 CHECK DRIVER'S CONTROL CENTER DIF-
FERENTIAL CONTROL MODULE INPUT
SIGNAL.
1) Place the shift lever in a position except for
neutral.
2) Read the data of "Neutral Switch" using the
Subaru Select Monitor.
MANUAL TRANSMISSION AND DIFFERENTIAL (DIAGNOSTICS)
Check
Is the "OFF" displayed?
6MT(diag)-69
Yes No
The neutral switch Repair the poor
circuit is currently contact.
operating properly.
A temporary poor
contact of connec-
tor or harness may
be the cause.
Repair the harness
or connector
between the
driver's control
center differential
control module,
neutral switch, and
ECM.