Subaru IMPREZA GD 2007 Series Manual page 3194

asieps_tobira_IM_US.book 65 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
15 CHECK POOR CONTACT OF ABSCM CON-
NECTORS.
16 CHECK TCM.
1) Connect the connector to the TCM.
2) Disconnect the connectors from ABSCM.
3) Measure the resistance between ABSCM
connector terminals.
Connector & terminal
(B301) No. 11 — (B301) No. 26:
17 CHECK POOR CONTACT OF TCM CONNEC-
TORS.
18 CHECK DTC DETECTION.
19 CHECK IF TCM SYSTEM DTC P1718 IS DE-
TECTED.
Check
Is there poor contact?
Is the resistance 120±6 Ω?
Is there poor contact?
Is DTC 47 is detected?
Is DTC P1718 detected?
ABS(diag)-65
ABS (DIAGNOSTICS)
Yes No
Repair the poor Replace the
contact of ABSCM ABSCM. <Ref. to
connector. ABS-6, ABS Con-
trol Module and
Hydraulic Control
Unit (ABSCM&H/
U).>
Go to step 18. Go to step 17.
Repair the poor Replace the TCM.
contact of TCM <Ref. to 4AT-64,
connector. Transmission Con-
trol Module
(TCM).>
Go to step 19.
Replace the
ABSCM. <Ref. to
ABS-6, ABS Con-
trol Module and
Hydraulic Control
Unit (ABSCM&H/
U).>
Replace the TCM. Replace the
<Ref. to 4AT-64, ABSCM. <Ref. to
Transmission Con- ABS-6, ABS Con-
trol Module trol Module and
(TCM).> Hydraulic Control
Unit (ABSCM&H/
U).>