Subaru IMPREZA GD 2007 Series Manual page 2574

asieps_tobira_IM_US.book 67 ページ ２０１２年１月１７日 火曜日 午後３時４８分
23.Air Breather Hose
A: REMOVAL
1) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H4SO)-6, REMOVAL, Air Intake
Chamber.>
2) Remove the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-13, REMOVAL, Intercooler.>
3) Disconnect the air breather hose.
• Non-turbo model
(A) Air breather hose (Transmission case)
(B) Air breather hose (Oil pump housing)
• Turbo model
(A) Air breather hose (Transmission case)
(B) Air breather hose (Oil pump housing)
Air Breather Hose
B: INSTALLATION
1) Install the air breather hose.
NOTE:
Install so that the hose is not folded over, exces-
sively bent or twisted.
• Non-turbo model
(A) Air breather hose (Transmission case)
(B) Air breather hose (Oil pump housing)
AT-00099
• Turbo model
(A) Air breather hose (Transmission case)
(B) Air breather hose (Oil pump housing)
AT-00098
2) Install the air intake chamber. (Non-turbo model)
<Ref. to IN(H4SO)-6, INSTALLATION, Air Intake
Chamber.>
3) Install the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-14, INSTALLATION, Intercooler.>
C: INSPECTION
Make sure the hose is not cracked or clogged.
4AT-67
AUTOMATIC TRANSMISSION
AT-00099
AT-00098