Subaru IMPREZA GD 2007 Series Manual page 2878

asieps_tobira_IM_US.book 55 ページ ２０１２年１月１７日 火曜日 午後３時４８分
4) Using ST1 and ST2, remove the rest of the
parts.
NOTE:
• When replacing the sleeve & hub, replace them
as a set.
• Do not disassemble the sleeve & hub; the align-
ing position is pre-matched.
• If it is necessary to disassemble, mark the en-
gaging points on the splines beforehand.
ST1 899864100 REMOVER
ST2 899714110 REMOVER
ST2
(A) Press
Main Shaft Assembly
(A)
ST1
MT-00190
5MT-55
MANUAL TRANSMISSION AND DIFFERENTIAL
D: ASSEMBLY
1) When the sleeve & hub assemblies have been
disassembled, reassemble by aligning the align-
ment marks.
NOTE:
Position the open ends of the spring 120° apart.
(A)
(B)
(C)
(D)
(A) 3rd-4th hub ASSY
(B) 3rd gear side
(C) 5th hub & sleeve No. 2
(D) 5th gear side
MT-01523