Subaru IMPREZA GD 2007 Series Manual page 3471

asieps_tobira_IM_US.book 65 ページ ２０１２年１月１７日 火曜日 午後３時４８分
8. Reservoir Tank
A: REMOVAL
1) Remove the air intake duct. <Ref. to IN(H4SO)-
7, REMOVAL, Air Intake Duct.>
2) Drain fluid from the reservoir tank.
3) Disconnect the pipe D from the return hose and
suction hose from the oil pump.
CAUTION:
• Do not allow fluid to come into contact with
the pulley belt.
• To prevent foreign matter from entering the
hose and pipe, cover the open ends of them
with clean cloth.
(1) Suction hose
(2) Pipe D
(3) Return hose
4) Remove the reservoir tank from the bracket by
pulling it upwards.
B: INSTALLATION
1) Install the reservoir tank to the bracket.
2) Connect the pipes D to the return hose and suc-
tion hose to the oil pump.
(1) Suction hose
(2) Pipe D
(3) Return hose
3) Replenish power steering fluid up to the speci-
fied level. <Ref. to PS-66, Power Steering Fluid.>
Reservoir Tank
POWER ASSISTED SYSTEM (POWER STEERING)
C: INSPECTION
Check the reservoir tank for cracks, breakage or
damage. If a failure is found, replace the reservoir
tank.
(1)
(2)
(3)
PS-00182
(1)
(2)
(3)
PS-00182
PS-65