Subaru IMPREZA GD 2007 Series Manual page 2968

asieps_tobira_IM_US.book 63 ページ ２０１２年１月１７日 火曜日 午後３時４８分
19.Transmission Case
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
REMOVAL, Oil Pipe.> <Ref. to 6MT-43, REMOV-
AL, Neutral Position Switch.> <Ref. to 6MT-42, RE-
MOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
56, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-58,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-59, RE-
MOVAL, Oil Pump.>
8) Remove the driven gear assembly shim and
spacer.
(A)
(A) Driven gear ASSY
9) Remove the snap ring.
Transmission Case
MANUAL TRANSMISSION AND DIFFERENTIAL
10) Remove the pilot bolt.
11) Remove the holder reverse bolt.
MT-00526
12) Remove the transmission case.
NOTE:
If the oil guide is caught between the shift fork, it
may be difficult to remove the transmission case.
Move the oil guide and oil pipe, then remove. Do
not pull on the transmission case with excessive
force.
MT-00527
13) Remove any remaining liquid gasket from the
transmission case and adapter plate.
6MT-63
MT-00528
MT-00529
MT-00530