asieps_tobira_IM_US.book 14 ページ 2012年1月17日 火曜日 午後3時48分
DRIVE SHAFT SYSTEM
ILLUSTRATION
ST-28099PA060
ST-28099PA070
2. GENERAL TOOL
DESCRIPTION
Puller
Dial gauge
Snap ring pliers
Bar
General Description
TOOL NUMBER
DESCRIPTION
28099PA060
HOUSING STAND
28099PA070
OIL SEAL
INSTALLER
Used for removing the ball joint from knuckle arm.
Used for inspecting the propeller shaft run-out.
Used for installing and removing the snap ring.
Used for extracting drive shaft.
DS-14
REMARKS
• Used for disassembling and assembling rear
housing bearing. (STI model)
• Used together with the BEARING PULLER
(927100000).
• Used for press-fitting rear housing oil seal.
(STI model)
• Used together with the HOUSING STAND
(28099PA060).
REMARKS