Subaru IMPREZA GD 2007 Series Manual page 3454

g07usen601.fm 48 ページ ２０１２年１月２３日 月曜日 午後２時２３分
POWER ASSISTED SYSTEM (POWER STEERING)
2. SERVICE LIMIT
Make a measurements as follows. If it exceeds the
specified service limits, adjust or replace.
NOTE:
When making a measurement, vise the gearbox
using ST. Never vise the gearbox by inserting alu-
minum plates etc. between vise and gearbox.
ST 926200000 STAND
Sliding resistance of rack shaft
Service limit
400 N (41 kgf, 90 lbf) or less
3. RACK SHAFT PLAY IN THE RADIAL
DIRECTION
Right-turn steering:
Service limit
0.19 mm (0.0075 in) or less
On condition
L: 5 mm (0.20 in)
P: 122.6 N (12.5 kgf, 27.6 lbf)
L
P
Steering Gearbox
Left-turn steering:
Service limit
Direction
0.3 mm (0.012 in) or less
Direction
0.15 mm (0.0059 in) or less
L: 5 mm (0.20 in)
P: 98 N (10 kgf, 22 lbf)
4. INPUT SHAFT PLAY
In radial direction:
PS-00099
Service limit
0.18 mm (0.0071 in) or less
On condition
P: 98 N (10 kgf, 22 lbf)
PS-00100
In axial direction:
Service limit
0.5 mm (0.020 in) or less
On condition
P: 20 — 49 N (2 — 5 kgf, 4 — 11 lbf)
PS-00101
PS-48
L
P
PS-00102
P
PS-00103
P
PS-00104