Subaru IMPREZA GD 2007 Series Manual page 3027

asieps_tobira_IM_US.book 122 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
27.Clutch Housing
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
REMOVAL, Oil Pipe.> <Ref. to 6MT-43, REMOV-
AL, Neutral Position Switch.> <Ref. to 6MT-42, RE-
MOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
56, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-58,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-59, RE-
MOVAL, Oil Pump.>
8) Remove the transmission case. <Ref. to 6MT-
63, REMOVAL, Transmission Case.>
9) Remove the individual gear assemblies. <Ref. to
6MT-68, REMOVAL, Main Shaft Assembly.>
10) Remove the drive pinion shaft assembly. <Ref.
to 6MT-94, REMOVAL, Drive Pinion Shaft Assem-
bly.>
11) Remove the front differential assembly. <Ref.
to 6MT-100, REMOVAL, Front Differential Assem-
bly.>
12) Remove the vehicle speed sensor. <Ref. to
6MT-31, REMOVAL, Vehicle Speed Sensor.>
13) Remove the speedometer gear. <Ref. to 6MT-
106, REMOVAL, Speedometer Gear.>
B: INSTALLATION
1) Install the pitching stopper bracket.
Tightening torque:
41 N·m (4.2 kgf-m, 30.2 ft-lb)
2) Install the speedometer gear. <Ref. to 6MT-106,
INSTALLATION, Speedometer Gear.>
3) Install the vehicle speed sensor. <Ref. to 6MT-
31, INSTALLATION, Vehicle Speed Sensor.>
4) Install the front differential assembly. <Ref. to
6MT-100, INSTALLATION, Front Differential As-
sembly.>
5) Install the drive pinion shaft assembly. <Ref. to
6MT-94, INSTALLATION, Drive Pinion Shaft As-
sembly.>
6) Install the individual gear assemblies all at once.
<Ref. to 6MT-69, INSTALLATION, Main Shaft As-
sembly.>
7) Install the transmission case. <Ref. to 6MT-64,
INSTALLATION, Transmission Case.>
Clutch Housing
8) Install the oil pump. <Ref. to 6MT-61, INSTAL-
LATION, Oil Pump.>
9) Install the center differential. <Ref. to 6MT-58,
INSTALLATION, Center Differential.>
10) Install the transfer driven gear. <Ref. to 6MT-
56, INSTALLATION, Transfer Driven Gear.>
11) Install the extension case. <Ref. to 6MT-44, IN-
STALLATION, Extension Case.>
12) Install the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-41,
INSTALLATION, Oil Pipe.> <Ref. to 6MT-43, IN-
STALLATION, Neutral Position Switch.> <Ref. to
6MT-42, INSTALLATION, Back-up Light Switch.>
13) Install the manual transmission assembly to the
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
1) Remove the clutch release bearing guide.
2) Remove the oil seal.
6MT-122
MT-01383
MT-01381