Subaru IMPREZA GD 2007 Series Manual page 3017

asieps_tobira_IM_US.book 112 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
2) Using the ST, install the 5th-6th shifter fork.
ST 398791700 REMOVER
NOTE:
Check that the 5th-6th shifter fork and arm are in-
stalled.
(B)
(A) 5th-6th shifter fork
(B) 5th-6th shifter arm
(C) Spring pin
4. SHIFTER ARM SHAFT
Using the ST, install the selector arm.
ST 398791700 REMOVER
NOTE:
Confirm that the selector arm and rod are installed
in the proper direction.
(A) Selector rod
(B) Selector arm
(C) Spring pin
Shifter Fork and Rod
(C)
(A)
MT-00699
(C)
(B)
(A)
MT-01096
6MT-112
5. STRIKING ROD
1) Using the ST, install the reverse interlock arm
and interlock arm.
ST 398791700 REMOVER
NOTE:
• Confirm that the reverse interlock arm and rod
are installed in the proper direction.
• Confirm that the interlock arm and rod are in-
stalled in the proper direction.
(C)
(A) Reverse interlock arm
(B) Interlock arm
(C) Spring pin
2) Attach the reverse interlock block and interlock
block to the striking rod.
NOTE:
Confirm that the reverse interlock block and inter-
lock block are installed in the proper direction.
(B)
(A) Reverse interlock block
(B) Interlock block
E: INSPECTION
1) Check the shift shaft and shift rod for damage.
Replace if damaged.
2) Repair or replace the gearshift mechanism if ex-
cessively worn, bent or defective in any way.
(C)
(A)
(B)
MT-00701
(A)
MT-00688