Subaru IMPREZA GD 2007 Series Manual page 2761

asieps_tobira_IM_US.book 28 ページ ２０１２年１月１７日 火曜日 午後３時４８分
CLUTCH SYSTEM
9. Clutch Fluid Air Bleeding
A: PROCEDURE
1. EXCEPT FOR STI MODEL
NOTE:
Bleed air from the oil line with help of a co-worker.
1) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H4SO)-6, REMOVAL, Air Intake
Chamber.>
2) Remove the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-13, REMOVAL, Intercooler.>
3) Fit one end of a vinyl tube into the air bleeder of
the operating cylinder, and put the other end into a
brake fluid container.
• Non-turbo model
(A)
(B)
(A) Clutch hose
(B) Air bleeder
• Turbo model
(A)
(B)
(A) Clutch hose
(B) Air bleeder
4) Slowly depress the clutch pedal and keep it de-
pressed. Then open the air bleeder to discharge air
together with the fluid.
Release the air bleeder for 1 or 2 seconds. Next,
with the bleeder closed, slowly release the clutch
pedal.
CAUTION:
Cover the bleeder with cloth to prevent brake
fluid from being splashed on surrounding parts
when loosening the bleeder.
Clutch Fluid Air Bleeding
• Non-turbo model
(A) Operating cylinder
(B) Vinyl tube
• Turbo model
CL-00360
(A) Operating cylinder
(B) Vinyl tube
5) Repeat procedure 4), until there are no more air
bubbles in the vinyl tube.
6) Tighten the air bleeder.
Tightening torque:
T: 7.8 N·m (0.8 kgf-m, 5.8 ft-lb)
• Non-turbo model
CL-00464
CL-28
(B)
(A)
(B)
(A)
T
CL-00357
CL-00465
CL-00358