Subaru IMPREZA GD 2007 Series Manual page 2768

asieps_tobira_IM_US.book 35 ページ ２０１２年１月１７日 火曜日 午後３時４８分
• Clutch switch (starter interlock)
Condition
When clutch pedal is
No. 1 — No. 2
depressed
When the clutch pedal
No. 1 — No. 2
is not depressed.
3) Make sure that engine does not start with clutch
pedal not depressed. If the engine starts, adjust the
clutch switch and inspect the starter interlock cir-
cuit.
4) Make sure that engine starts with clutch pedal
fully depressed. If the engine does not start, adjust
the clutch switch and inspect the starter interlock
circuit.
D: ADJUSTMENT
1) Loosen the lock nut of clutch switch (starter in-
terlock).
(A)
(A) Lock nut
(B) Clutch switch (starter interlock)
2) Fully depress the clutch and hold it.
Clutch Switch
Specified
Terminal No.
resistance
Less than 1 Ω
1 MΩ or more
1
2
CL-00102
(B)
CL-00105
CL-35
3) Adjust the gap of the clutch pedal plate and the
clutch switch to be 3 — 3.5 mm (0.12 — 0.14 in).
(A)
(C)
(A) Plate
(B) Clutch switch (starter interlock)
(C) 3 — 3.5 mm (0.12 — 0.14 in)
4) Tighten the lock nut.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
CLUTCH SYSTEM
(B)
CL-00104