asieps_tobira_IM_US.book 31 ページ 2012年1月17日 火曜日 午後3時48分
12) Remove the valve assembly paying attention
not to scratch the seal ring or valve housing inner
surfaces.
(1) Valve ASSY
(2) Seal ring
13) Remove the holder using a 36 mm spanner or
adjustable wrench.
14) Attach the ST on the valve side of rack, and
press out the outer side oil seal while taking care
that the rack and the steering body inner surface do
not come into contact with each other.
ST 34199FE000 INSTALLER & REMOVER
Steering Gearbox
POWER ASSISTED SYSTEM (POWER STEERING)
NOTE:
Block the pipe connection of steering body to pre-
vent fluid from flowing out.
(1)
(2)
PS-00649
(1) Rack piston
(2) Outer side oil seal
15) Insert the ST from the valve side and press the
back-up ring and oil seal out.
ST 34199FE010 REMOVER
PS-00782
PS-31
PS-00064
PS-00065