asieps_tobira_IM_US.book 50 ページ 2012年1月17日 火曜日 午後3時48分
MANUAL TRANSMISSION AND DIFFERENTIAL
4) Refer to the calculated value "t" to select the
closest thrust washer from the following table.
Standard clearance between the thrust washer
and transfer drive gear
0.75 — 0.95 mm (0.030 — 0.037 in)
Thrust washer (36.3 × 52 × t)
Part No.
803036070
803036071
803036072
803036073
803036074
803036075
5) Install the selected thrust washer.
Extension Case
Thickness mm (in)
0.80 (0.0315)
0.95 (0.0374)
1.10 (0.0433)
1.25 (0.0492)
1.40 (0.0551)
0.65 (0.0256)
6MT-50