Subaru IMPREZA GD 2007 Series Manual page 2572

asieps_tobira_IM_US.book 65 ページ ２０１２年１月１７日 火曜日 午後３時４８分
22.ATF Cooler Pipe and Hose
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the battery and washer tank.
3) Lift up the vehicle.
4) Remove the under cover.
5) Disconnect the ATF cooler hose from the radia-
tor.
NOTE:
• Do not use a screwdriver or other pointed tools.
• If it is hard to remove the hose, wrap the hose
with cloth to prevent from damaging it, and while
turning with pliers, pull straight out by hand.
6) Disconnect the ATF cooler hoses from the pipes.
NOTE:
• Do not use a screwdriver or other pointed tools.
• If it is hard to remove the hose, wrap the hose
with cloth to prevent from damaging it, and while
turning with pliers, pull straight out by hand.
ATF Cooler Pipe and Hose
7) Disconnect the ATF cooler pipe from frame.
8) Remove the oil cooler inlet and outlet pipes.
AT-01345
NOTE:
When disconnecting the outlet pipe, be careful not
to lose the ball and spring used together with re-
taining screw.
(A) Inlet pipe
(B) Outlet pipe
AT-01333
4AT-65
AUTOMATIC TRANSMISSION
AT-00456
(A)
(B)
AT-01348