Subaru IMPREZA GD 2007 Series Manual page 3238

asieps_tobira_IM_US.book 29 ページ ２０１２年１月１７日 火曜日 午後３時４８分
5. Rear Brake Pad
A: REMOVAL
1. 14-INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, then remove the rear wheels.
4) Remove the lower caliper bolts.
5) Raise the caliper body and support it.
NOTE:
Do not disconnect the brake hose from the caliper
body.
6) Remove the pad.
NOTE:
If it is difficult to remove the brake pad, use the
same procedure as front disc brake pad. <Ref. to
BR-17, REMOVAL, Front Brake Pad.>
Rear Brake Pad
2. 15-INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, then remove the rear wheels.
4) Remove the M clip.
(1) M clip
(2) Caliper body
BR-00123
5) Remove the 2 pad pins.
6) Remove the cross spring.
(1) Cross spring
(2) Pad pin
7) Spread the pads apart and push back the piston.
8) Remove the pad and shim.
BR-00032
(1) Brake pad
BR-29
BRAKE
(1)
(2)
BR-00310
(1)
(2)
BR-00311
(1)
BR-00312