Subaru IMPREZA GD 2007 Series Manual page 2642

asieps_tobira_IM_US.book 3 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Step
5 PERFORM GENERAL DIAGNOSTICS.
1) Inspect using "Diagnostic Procedure with-
out Diagnostic Trouble Code (DTC)". <Ref. to
4AT(D)(diag)-86, Diagnostic Procedure without
Diagnostic Trouble Code (DTC).>
2) Inspect using "General Diagnostic Table".
<Ref. to 4AT(D)(diag)-89, General Diagnostic
Table.>
3) Perform the Clear Memory Mode.
<Ref. to 4AT(D)(diag)-19, WHEN USING THE
SUBARU SELECT MONITOR, OPERATION,
Clear Memory Mode.>
4) Perform the Inspection Mode. <Ref. to
4AT(D)(diag)-18, Inspection Mode.>
5) Display the DTC.
<Ref. to 4AT(D)(diag)-17, OPERATION, Read
Diagnostic Trouble Code (DTC).>
6 PERFORM DIAGNOSIS.
1) Inspect using the "Diagnostic Procedure
with Diagnostic Trouble Code (DTC)". <Ref. to
4AT(D)(diag)-31, Diagnostic Procedure with
Diagnostic Trouble Code (DTC).>
NOTE:
Refer to "List of Diagnostic Trouble Code
(DTC)" for DTC table. <Ref. to 4AT(D)(diag)-29,
List of Diagnostic Trouble Code (DTC).>
2) Repair the trouble cause.
3) Perform the Clear Memory Mode.
<Ref. to 4AT(D)(diag)-19, WHEN USING THE
SUBARU SELECT MONITOR, OPERATION,
Clear Memory Mode.>
4) Perform the Inspection Mode. <Ref. to
4AT(D)(diag)-18, Inspection Mode.>
5) Display the DTC.
<Ref. to 4AT(D)(diag)-17, OPERATION, Read
Diagnostic Trouble Code (DTC).>
Basic Diagnostic Procedure
Check
Is DTC displayed?
Is DTC displayed?
4AT(D)(diag)-3
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Yes
Go to step 6.
Inspect using the
"Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC)". <Ref. to
4AT(D)(diag)-31,
Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC).>
No
Finish the diagno-
sis.
Finish the diagno-
sis.