Subaru IMPREZA GD 2007 Series Manual page 2818

asieps_tobira_IM_US.book 45 ページ ２０１２年１月１７日 火曜日 午後３時４８分
16) Fix the reverse check cable to the stay clip.
NOTE:
Install the reverse check cable on top of the stay.
(A)
(A) Reverse check cable
(B) Clip
E: INSPECTION
1) Check the removed parts (bushing, cushion rub-
ber, spacer, boot, stay and rod, etc.) for deforma-
tion, damage and wear. If necessary, correct or
replace faulty parts.
• 5MT
(C)
(A)
(C)
(A)
(A) Bushing
(B) Cushion rubber
(C) Spacer
(D) Boot
(E) Stay
(F) Rod
MT Gear Shift Lever
(B)
CS-00243
(F)
(A)
(C)
(D)
(B)
(E)
CS-00323
CS-45
• 6MT
2) Check the swing torque of rod linked with the
gear shift lever.
If the torque exceeds the specifications, replace the
bushing or retighten nuts.
Swing torque:
3.7 N (0.38 kgf, 0.84 lbf) or less
(B)
(A) Pivot
(B) Swing torque
CONTROL SYSTEMS
CS-00244
(A)
CS-00116