Subaru IMPREZA GD 2007 Series Manual page 2964

asieps_tobira_IM_US.book 59 ページ ２０１２年１月１７日 火曜日 午後３時４８分
18.Oil Pump
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear. <Ref. to 6MT-
56, REMOVAL, Transfer Driven Gear.>
5) Remove the center differential. <Ref. to 6MT-58,
REMOVAL, Center Differential.>
6) Remove the oil guide.
(A) Oil guide
7) Remove the snap ring and flat washer.
(A) Snap ring
(B) Flat washer
Oil Pump
MANUAL TRANSMISSION AND DIFFERENTIAL
8) Using an ST, remove the neutral set spring and
support.
ST1 18756AA000 CLAW
ST2 399893600
9) Lift the striking rod, and remove the spring pin.
(A)
MT-00953
10) Remove the selector arm No. 2 and the shifter
arm. (Transmission serial No. 144576 or earlier)
(A)
(B)
MT-01306
6MT-59
PLIER
ST2 ST2
ST1
(A)
(B)
(A) Striking rod
(B) Spring pin
(A)
(B)
(A) Selector arm No. 2
(B) Shifter arm
MT-01092
MT-01307
MT-01308