asieps_tobira_IM_US.book 128 ページ 2012年1月17日 火曜日 午後3時48分
AUTOMATIC TRANSMISSION
18) Install the snap ring to the low clutch drum.
(A)
(A) Snap ring
(B) Front planetary carrier
19) Install the needle bearing, and then secure with
the snap ring.
(A)
(A) Needle bearing
(B) Snap ring
20) Install the one-way clutch, and then secure with
the snap ring.
21) Set the inner race. Make sure that the clutch
locks in the clockwise direction and rotates in the
counterclockwise direction.
(A)
(A) Lock
(B) Free
AT Main Case
3. 2-4 BRAKE
1) Apply ATF to the new D-ring, and then install it to
the 2-4 brake piston.
2) Install 2-4 brake piston to 2-4 brake piston re-
tainer.
(B)
AT-00281
(B)
4. ONE-WAY CLUTCH INNER RACE
1) Install the needle bearing to inner race using ST
and a press.
ST 398497701
AT-00268
2) Apply Vaseline to the groove of the inner race
and seal ring.
3) Install two seal rings to the one-way clutch inner
race.
(B)
AT-00282
4AT-128
( B )
( A )
(A) 2-4 brake piston
(B) 2-4 brake piston retainer
INSTALLER
ST
(A)
(B)
(A) One-way clutch inner race
(B) Seal ring
AT-00288
AT-00299
AT-00298