Subaru IMPREZA GD 2007 Series Manual page 2962

asieps_tobira_IM_US.book 57 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Transfer Driven Gear
MANUAL TRANSMISSION AND DIFFERENTIAL
2) Using the ST, install the roller bearing (transmis-
sion case side).
ST 499757002 INSTALLER
CAUTION:
Do not apply pressure in excess of 10 kN (1 ton,
1.1 US ton, 1.0 Imp ton).
ST
(A)
MT-00514
(A) Roller bearing
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• Damage or rust on the bearings
• Wear, or damage
• After applying gear oil, if the bearing does not ro-
tate smoothly or an abnormal noise is emitted.
2) Driven gear
Replace the driven gear in the following cases.
If the driven gear tooth surface and shaft are exces-
sively damaged or broken.
6MT-57