asieps_tobira_IM_US.book 52 ページ 2012年1月17日 火曜日 午後3時48分
AUTOMATIC TRANSMISSION
19) Disconnect the connector from the rear vehicle
speed sensor. (VTD model)
(A) Rear vehicle speed sensor
20) Disconnect the connector from the rear vehicle
speed sensor. (MP-T model)
(A) Rear vehicle speed sensor
21) Remove the oil pan.
NOTE:
Be careful not to allow foreign matter such as dust
or dirt to enter the oil pan.
22) Disconnect the harness connector and trans-
mission ground terminal.
(B)
(A) Transmission ground
(B) Harness connector
23) Remove the harness assembly.
Front Vehicle Speed Sensor
(A)
AT-03601
(A)
AT-02207
(A)
AT-00050
4AT-52
B: INSTALLATION
1) Pass the harness assembly through the hole in
transmission case.
2) Connect the harness connector and transmis-
sion ground.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)
(A)
(B)
(A) Transmission ground
(B) Harness connector
3) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
or equivalent
AT-00048
AT-00050
AT-02742