Subaru IMPREZA GD 2007 Series Manual page 2580

asieps_tobira_IM_US.book 73 ページ ２０１２年１月１７日 火曜日 午後３時４８分
6) Using the ST1, ST2 and ST3, install the snap
ring.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
ST3 398663600 PLIER
ST3
E: INSPECTION
• Use compressed air to make sure that the trans-
fer pipe and extension case passages are not
clogged or leaking.
• Inspect the extension end play, and adjust it to
within the standard value.
MP-T model <Ref. to 4AT-77, MP-T MODEL, AD-
JUSTMENT, Transfer Clutch.>
VTD model <Ref. to 4AT-78, VTD MODEL, AD-
JUSTMENT, Transfer Clutch.>
Extension Case
ST1
ST2
AT-00121
4AT-73
AUTOMATIC TRANSMISSION