asieps_tobira_IM_US.book 38 ページ 2012年1月17日 火曜日 午後3時48分
CONTROL SYSTEMS
7) Remove the spring pin, and then remove the
bushing and snap ring.
(A) Spring pin
(B) Bushing
8) Remove the boss from the joint.
2. 6MT
1) Remove the spring pin from the slider.
(A)
(A) Slider
(B) Spring pin
MT Gear Shift Lever
(B)
(A)
CS-00060
CS-00322
(B)
CS-00761
CS-38
2) Remove the slider and spring.
(A) Slider
(B) Spring
3) Cut the band clip.
4) Remove the reverse check cable from the cable
plate.
(B)
(A)
(A) Cable plate
(B) Reverse check cable
5) Remove the reverse check cable from the gear
shift assembly.
(A)
(B)
CS-00762
CS-00227
CS-00228
CS-00229