asieps_tobira_IM_US.book 43 ページ 2012年1月17日 火曜日 午後3時48分
5) Apply sufficient grease to the boss, and then in-
stall the gear shift lever to the stay.
6) Install the washer and snap ring.
(A) Snap ring
7) Insert the gear shift lever and rod into boot hole.
8) Install the rod.
Tightening torque:
11.8 N·m (1.2 kgf-m, 8.7 ft-lb)
(A)
(C)
(A) Rod
(B) Lever
(C) Stay
MT Gear Shift Lever
CS-00235
(A)
CS-00234
(B)
CS-00233
CS-43
9) Attach the boss to the rod.
Tightening torque:
11.8 N·m (1.2 kgf-m, 8.7 ft-lb)
(B)
(A) Rod
(B) Boss
10) Install a new lock wire.
(A) Lock wire
CONTROL SYSTEMS
(A)
CS-00232
(A)
CS-00231