Subaru IMPREZA GD 2007 Series Manual page 2969

asieps_tobira_IM_US.book 64 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Check that the shifter fork and the interlock block
are both shifted into the neutral position. If they are
not, shift into the neutral position.
(C)
(A) Striking rod
(B) Reverse interlock block
(C) Interlock block
2) Apply liquid gasket to the adapter plate.
Liquid gasket:
THREE BOND 1215 (Part No. 004403007)
3) Install the transmission case.
Transmission Case
4) By inspecting from the pilot bolt attachment hole,
check that the interlock block and the reverse inter-
lock block aligned in the neutral position. If not
aligned in neutral, remove the transmission case,
and shift the shifter fork and interlock block to the
neutral position.
(A)
5) Temporarily attach the pilot bolt with a new gas-
ket.
(B)
6) Affix the transmission case with the bolts and
nuts.
Tightening torque:
50 N·m (5.1 kgf-m, 36.9 ft-lb)
MT-00531
7) Tighten the pilot bolt.
Tightening torque:
34 N·m (3.5 kgf-m, 25.1 ft-lb)
8) Tighten the holder reverse bolt.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
MT-00532
6MT-64
(B)
(A)
(A) Interlock block
(B) Reverse interlock block
MT-00533