Subaru IMPREZA GD 2007 Series Manual page 2890

asieps_tobira_IM_US.book 67 ページ ２０１２年１月１７日 火曜日 午後３時４８分
5) When the specified starting torque cannot be ob-
tained by adjusting washer No. 1, select adjusting
washer No. 2 from the following table. Repeat
steps 1) through 4) to adjust starting torque.
(A) Adjusting washer No. 1
(B) Adjusting washer No. 2
Starting torque Dimension H
Low Small
High Large
Adjusting washer No. 2
Part No.
803025059
803025054
803025058
6) Recheck that the starting torque is within the
specified range, then crimp the lock nut at four po-
sitions.
Drive Pinion Shaft Assembly
( A )
( B )
MT-00270
Adjusting washer No. 2
Select thicker one.
Select thinner one.
Thickness mm (in)
3.850 (0.1516)
4.000 (0.1575)
4.150 (0.1634)
5MT-67
MANUAL TRANSMISSION AND DIFFERENTIAL