Subaru IMPREZA GD 2007 Series Manual page 3098

asieps_tobira_IM_US.book 63 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
7 CHECK DRIVER'S CONTROL CENTER DIF-
FERENTIAL CONTROL MODULE INPUT
SIGNAL.
1) Push and hold down the manual mode
switch.
2) Read the data of "AUTO/MANUAL mode
change switch" using the Subaru Select Moni-
tor.
MANUAL TRANSMISSION AND DIFFERENTIAL (DIAGNOSTICS)
Check
Is the data "ON"?
6MT(diag)-63
Yes No
The manual mode Repair the poor
circuit is currently contact.
operating properly.
A temporary poor
contact of connec-
tor or harness may
be the cause.
Repair the harness
or connector
between the
driver's control
center differential
control module,
manual mode
switch and chassis
ground.