Subaru IMPREZA GD 2007 Series Manual page 3399

asieps_tobira_IM_US.book 3 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2. PARKING BRAKE CABLE
T2
(2)
(1)
(1) Parking brake lever
(2) Parking brake switch
(3) Lock nut
(4) Adjusting nut
(5) Equalizer
(6) Bracket
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. of different grades or man-
ufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part in a vise, place cushioning
material such as wood blocks, aluminum plate or
cloth between the part and the vise.
• Make sure grease does not come into contact
with the parking shoes.
General Description
(10)
(8)
T2
(7)
T1
(3)
(6)
(4)
(5)
(7) Clamp
(8) Parking brake cable RH
(9) Cable guide
(10) Clamp (Rear disc brake model)
(11) Parking brake cable LH
PB-3
(9)
T3
(9)
T3
(11)
T2
Tightening torque:N·m (kgf-m, ft-lb)
T1: 6 (0.6, 4.4)
T2: 18 (1.8, 13.0)
T3: 32 (3.3, 23.6)
PARKING BRAKE
(10)
PB-00073