Subaru IMPREZA GD 2007 Series Manual page 3259

asieps_tobira_IM_US.book 50 ページ ２０１２年１月１７日 火曜日 午後３時４８分
BRAKE
4) While holding the hexagonal part of brake hose
fitting with a wrench, tighten the flare nut to the
specified torque.
Tightening torque (brake pipe flare nut):
15 N·m (1.5 kgf-m, 10.8 ft-lb)
(2)
(1)
(1) Brake pipe
(2) Brake hose
(3) Brake hose clamp
5) Bleed air from the brake system.
C: INSPECTION
Check that there are no cracks, breakage, or dam-
age on hoses. Check the joints for fluid leakage. If
any cracks, breakage, damage or leakage is found,
repair or replace the hose.
Brake Hose
(3)
(3)
BR-00096
BR-50