asieps_tobira_IM_US.book 51 ページ 2012年1月17日 火曜日 午後3時48分
14.Reverse Check System
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 6MT-34, REMOVAL,
Manual Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-39, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-44,
REMOVAL, Extension Case.>
4) Remove the snap ring and washer from the re-
verse check shaft.
(A) Snap ring
(B) Washer
5) Remove the reverse check shaft and spring from
the extension case.
Reverse Check System
MANUAL TRANSMISSION AND DIFFERENTIAL
6) Remove the spring pin, and remove the reverse
check lever and oil seal from the reverse check
shaft.
NOTE:
Do not reuse the oil seal.
(B)
(A)
7) Remove the plug from the extension case, and
remove the gasket, spring and plunger.
MT-00494
NOTE:
Do not reuse the gasket.
MT-00495
8) Remove the reverse lock plunger.
6MT-51
(B)
(C)
(A) Spring pin
(B) Reverse check lever
(C) Oil seal
(D)
(A) Plug
(B) Gasket
(C) Spring
(D) Plunger
(A)
(A) Reverse lock plunger
(A)
MT-00496
(C)
(B)
(A)
MT-00497
MT-00498