Subaru IMPREZA GD 2007 Series Manual page 3313

asieps_tobira_IM_US.book 47 ページ ２０１２年１月１７日 火曜日 午後３時４８分
• Face contact
Check item: Backlash is too large.
Contact pattern
Corrective action: Increase the thickness of pinion
height adjusting washer according to the procedure
for bringing the drive pinion close to the driven gear.
• Flank contact
Check item: Backlash is too small.
Contact pattern
Corrective action: Reduce the thickness of pinion
height adjusting washer according to the procedure
for bringing drive pinion away from hypoid driven
gear.
Rear Differential
• Toe contact (inside contact)
Check item: Teeth contact area is too small.
Contact pattern
AT-00208
Corrective action: Reduce the thickness of pinion
height adjusting washer according to the procedure
for bringing drive pinion away from hypoid driven gear.
AT-00212
• Heel contact (outside end contact)
Check item: Teeth contact area is too small.
Contact pattern
AT-00209
Corrective action: Increase thickness of pinion
height adjusting washer according to the proce-
dures for moving the drive pinion closer to the driv-
en gear.
AT-00213
DI-47
DIFFERENTIALS
AT-00210
AT-00213
AT-00211
AT-00212