Subaru IMPREZA GD 2007 Series Manual page 3249

asieps_tobira_IM_US.book 40 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Master Cylinder
BRAKE
5) Install the seal to reservoir tank.
BR-00072
(1)
(1) Seal
6) Install the reservoir tank to the master cylinder,
and secure with pin.
E: INSPECTION
If any damage, deformation, wear, swelling, rust or
other faults are found on the primary piston assem-
bly or secondary piston assembly, replace the
faulty part.
NOTE:
• Replace the primary and secondary piston as a
set.
• The limit of the clearance between each piston
and master cylinder inner diameter is 0.11 mm
(0.0043 in).
BR-40