Subaru IMPREZA GD 2007 Series Manual page 3486

asieps_tobira_IM_US.book 4 ページ ２０１２年１月１７日 火曜日 午後３時４８分
REAR SUSPENSION
(1) Stabilizer
(2) Stabilizer bracket
(3) Stabilizer bushing
(4) Clamp
(5) Floating bushing
(6) Stopper
(7) Stabilizer link (STI model)
(8) Stabilizer link (STI model)
(9) Bushing (C)
(10) Bushing (A)
(11) Front lateral link
(turbo model and STI model)
(12) Bushing (B)
(13) Trailing link rear bushing
(14) Trailing link
(15) Trailing link front bushing
(16) Trailing link bracket
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before disposing of shock absorbers, be sure to
bleed the gas out completely. Also, do not expose
to flames or fire.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. of different grades or man-
ufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vise.
General Description
(17) Cap (Protection)
(18) Washer
(19) Rear crossmember
(20) Strut mount cap
(21) Strut mount
(22) Self-locking nut
(23) Dust cover
(24) Coil spring
(25) Helper
(26) Lower rubber seat
(27) Damper strut
(28) Differential rear member
(29) Stabilizer link
(Except for STI model)
(30) Front lateral link
(non-turbo model)
RS-4
(31) Rear lateral link
(Except for STI model)
(32) Flange nut
Tightening torque:N·m (kgf-m, ft-lb)
T1: 20 (2.0, 14.5)
T2: 25 (2.5, 18.1)
T3: 45 (4.6, 33.2)
T4: 55 (5.6, 40.6)
T5: 70 (7.1, 52)
T6: 90 (9.2, 66)
T7: 100 (10.2, 74)
T8: 115 (11.7, 85)
T9: 130 (13.3, 96)
T10: 140 (14.3, 103)
T11: 200 (20.0, 145)