Subaru IMPREZA GD 2007 Series Manual page 2898

asieps_tobira_IM_US.book 75 ページ ２０１２年１月１７日 火曜日 午後３時４８分
19.Speedometer Gear
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 5MT-25, REMOVAL,
Manual Transmission Assembly.>
2) Remove the back-up light switch and the neutral
position switch. <Ref. to 5MT-35, REMOVAL,
Switches and Harness.>
3) Remove the transfer case together with the ex-
tension case assembly. <Ref. to 5MT-39, REMOV-
AL, Transfer Case
Assembly.>
4) Remove the transmission case. <Ref. to 5MT-
51, REMOVAL, Transmission Case.>
5) Remove the vehicle speed sensor. <Ref. to
5MT-37, REMOVAL, Vehicle Speed Sensor.>
6) Remove the snap ring (outer) and pull out the
speedometer driven gear. Next, remove the oil
seal, speedometer shaft and washer.
(A)
(A) Snap ring (Outer)
(B) Speedometer driven gear
Speedometer Gear
and Extension Case
(B)
MT-00301
5MT-75
MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Install the washer and speedometer shaft, and
press fit the oil seal with the ST.
NOTE:
If the oil seal has been removed, use a new oil seal.
ST 899824100 or 499827000PRESS
2) Install the vehicle speed sensor. <Ref. to 5MT-
37, INSTALLATION, Vehicle Speed Sensor.>
3) Install the speed meter driven gear and snap
ring (outer).
NOTE:
If the oil seal has been removed, use a new snap
ring.
(A)
(A) Snap ring (Outer)
(B) Speedometer driven gear
4) Install the transmission case. <Ref. to 5MT-51,
INSTALLATION, Transmission Case.>
5) Install the transfer case together with the exten-
sion case assembly. <Ref. to 5MT-39, INSTALLA-
TION, Transfer Case and Extension Case
Assembly.>
6) Install the back-up light switch and neutral posi-
tion switch. <Ref. to 5MT-35, INSTALLATION,
Switches and Harness.>
7) Install the manual transmission assembly to the
vehicle. <Ref. to 5MT-28, INSTALLATION, Manual
Transmission Assembly.>
C: INSPECTION
Check the speedometer driven gear, oil seal and
speedometer shaft for damage. Replace if dam-
aged.
(B)
MT-00301