Subaru IMPREZA GD 2007 Series Manual page 2853

asieps_tobira_IM_US.book 30 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MANUAL TRANSMISSION AND DIFFERENTIAL
18) Install the hanger bracket on the right side of
the transmission.
19) Install the rear exhaust pipe and muffler.
• Non-turbo model
<Ref. to EX(H4SO)-8, INSTALLATION, Rear Ex-
haust Pipe.> <Ref. to EX(H4SO)-9, INSTALLA-
TION, Muffler.>
• Turbo model
<Ref. to EX(H4DOTC)-15, INSTALLATION, Rear
Exhaust Pipe.> <Ref. to EX(H4DOTC)-17, IN-
STALLATION, Muffler.>
20) Install the front exhaust pipe and the center ex-
haust pipe. (Non-turbo model)
<Ref. to EX(H4SO)-5, INSTALLATION, Front Ex-
haust Pipe.> <Ref. to EX(H4SO)-7, INSTALLA-
TION, Center Exhaust Pipe.>
21) Install the center exhaust pipe. (Turbo model)
<Ref. to EX(H4DOTC)-11, INSTALLATION, Center
Exhaust Pipe.>
22) Install the under cover.
Manual Transmission Assembly
23) Install the operating cylinder.
Tightening torque:
37 N·m (3.8 kgf-m, 27.5 ft-lb)
• Non-turbo model
MT-00074
• Turbo model
24) Connect the following connectors.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
25) Install the air cleaner case stay.
Tightening torque:
16 N·m (1.6 kgf-m, 11.6 ft-lb)
26) Install the air intake duct and air cleaner case.
(Non-turbo model)
<Ref. to IN(H4SO)-5, INSTALLATION, Air Cleaner
Case.>, <Ref. to IN(H4SO)-7, INSTALLATION, Air
Intake Duct.>
27) Install the intercooler. (Turbo model)
<Ref. to IN(H4DOTC)-14, INSTALLATION, Inter-
cooler.>
28) Connect the ground cable to battery.
29) Take off the vehicle from lift arms.
5MT-30
(1) Transmission ground cable
(2) Vehicle speed sensor connector
(3) Neutral position switch connector
(4) Back-up light switch connector
MT-01214
MT-01444