Subaru IMPREZA GD 2007 Series Manual page 3230

asieps_tobira_IM_US.book 21 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Front Disc Rotor
A: REMOVAL
1. 15-INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, and remove the front wheels.
4) Remove the caliper body and the support from
housing, and suspend it from the strut using a wire.
5) Remove the disc rotor.
NOTE:
If it is difficult to remove the disc rotor from the hub,
drive an 8 mm bolt into the threaded section (B) of
the disc rotor, then remove the disc rotor.
A
6) Remove mud and foreign matter from the caliper
body assembly and the support.
2. 16 INCH AND 17 INCH TYPE
1) Set the vehicle on a lift.
2) Loosen the wheel nuts.
3) Lift up the vehicle, and remove the front wheels.
4) Remove the caliper body from the housing, and
suspend it from the strut using a wire.
Front Disc Rotor
5) Remove the disc rotor from the hub.
NOTE:
If it is difficult to remove the disc rotor from the hub,
drive an 8 mm bolt into the threaded section B of
the disc rotor, then remove the disc rotor.
6) Remove mud and foreign objects from the cali-
per body assembly.
B: INSTALLATION
BR-00017
1) Install the disc rotor.
2) Install the caliper body and the support to hous-
ing.
Tightening torque:
Excluding the 17-inch type:
80 N·m (8.2 kgf-m, 59 ft-lb)
17-inch type:
155 N·m (15.8 kgf-m, 114.3 ft-lb)
3) Install the wheel.
B
BR-00018
BR-00297
BR-21
B
A
BR-00018
BRAKE